Main Performance Parameters
Technical parameters of the configured pneumatic actuator | Main technical parameters of valve body | ||
Cylinder type | GT series, AT series | Valve type | Middle line soft seal butterfly valve |
Work way | Double acting piston type, single acting spring return type | Valve type | D671X/F |
Air pressure | 4~8Bar | Connection mode | Wafer type |
Working medium | Dry and clean without corrosive gas | Nominal diameter | DN40~300mm |
Working temperature | Room temperature type: ~ 20 ℃ to 80 ℃ (nitrile rubber O-rings) | Nominal pressure | 0.6~1.6MPa |
High temperature type: - 20 ℃ to 160℃ (fluorine rubber O-rings) | Body material | RPP、PVDF、CPVC、UPVC Etc | |
Range of motion | 0~90°±5° | Butterfly material | RPP、PVDF、CPVC、UPVC Etc |
Interface thread | GT52~GT83 G1/8" | Seat tightness | EPDM、FPM And fluorine rubber, etc |
GT110~GT210 AT52~AT210 G1/4" | Suitable temperature | EPDM≤80℃ Fluorine rubber≤120℃ | |
Valve position signal | Locator: 4~20mA/reply: full ON/OFF signal | Applicable medium | Water, steam, oil corrosion and the corrosion medium, etc |
Main Outline Connection Dimention
DN(mm) | Dimension code pressure :1.0MPa unit :mm | Pneumatic actuators matches | ||||||
L | T | H | K | R | S | D | ||
40 | 147 | 42 | 220 | 79.5 | 45.3 | 4*Φ18 | 110 | AT52 |
50 | 147 | 42 | 235 | 82.5 | 56.5 | 4*Φ18 | 125 | AT52 |
65 | 168 | 44.7 | 245 | 92.5 | 69.5 | 4*Φ18 | 145 | AT63 |
80 | 182 | 45 | 260 | 100 | 79.5 | 8*Φ18 | 160 | AT75 |
100 | 204 | 51.2 | 280 | 114.5 | 102.5 | 8*Φ18 | 180 | AT83 |
125 | 238 | 54.4 | 322 | 128.5 | 130 | 8*Φ18 | 210 | AT92 |
150 | 268 | 55 | 374 | 142.5 | 152 | 8*Φ18 | 240 | AT105 |
200 | 301 | 58.8 | 428 | 171.5 | 203 | 8*Φ23 | 295 | AT130 |
250 | 390 | 65.7 | 482 | 205.5 | 255 | 8*Φ23 | 350 | AT140 |
300 | 458 | 76 | 574 | 245 | 309.5 | 12*Φ23 | 400 | AT160 |