Pneumatic screw ball valve
Pneumatic screw ball valve
閥門型號：Q611F/N/PPL/H Q661
公稱通徑：DN6~100mm
公稱壓力：1.6~6.4MPa 1000WOG
工作溫度：Room temperature type: ~ 20 ℃ to 80 ℃ (nitrile rubber O-rings)
適用溫度：PTFE≤150℃、PPL≤300℃、Metal seal≤425℃
鏈接方式：Thread NPT, RC, BSPT and BW SW, etc
閥體材質：Cast steel, stainless steel 304/316/316l, etc
作用方式：Double acting piston type, single acting spring return type
Main Performance Parameters
Technical parameters of the configured pneumatic actuator | Main technical parameters of valve body | ||
Cylinder type | GT series, AT series, AW series | Valve type | Two-piece type and three-piece type |
Work way | Double acting piston type, single acting spring return type | Valve type | Q611F/N/PPL/H Q661 |
Air pressure | 4~8Bar | Connection mode | Thread NPT, RC, BSPT and BW SW, etc |
Working medium | Dry and clean without corrosive gas | Nominal diameter | DN6~100mm |
Working temperature | Room temperature type: ~ 20 ℃ to 80 ℃ (nitrile rubber O-rings) | Nominal pressure | 1.6~6.4MPa 1000WOG |
High temperature type: - 20 ℃ to 160℃ (fluorine rubber O-rings) | Body material | Cast steel, stainless steel 304/316/316l, etc | |
Range of motion | 0~90°±5° | Ball material | Stainless steel 304/316/316l etc |
Interface thread | GT52~GT83 G1/8" | Seat tightness | PTFE、PPL、 Metal material seal, etc |
GT110~GT210 AT52~AT210 G1/4" | Suitable temperature | PTFE≤150℃、PPL≤300℃、 Metal seal≤425℃ | |
Valve position signal | Locator: 4~20mA/reply: full ON/OFF signal | Applicable medium | Water, steam, oil corrosion and the corrosion medium, etc |
Main Outline Connection Dimention
Technical parameters of the configured pneumatic actuator | Main technical parameters of valve body | ||
Cylinder type | GT series, AT series, AW series | Valve type | Two-piece type and three-piece type |
Work way | Double acting piston type, single acting spring return type | Valve type | Q611F/N/PPL/H Q661 |
Air pressure | 4~8Bar | Connection mode | Thread NPT, RC, BSPT and BW SW, etc |
Working medium | Dry and clean without corrosive gas | Nominal diameter | DN6~100mm |
Working temperature | Room temperature type: ~ 20 ℃ to 80 ℃ (nitrile rubber O-rings) | Nominal pressure | 1.6~6.4MPa 1000WOG |
High temperature type: - 20 ℃ to 160℃ (fluorine rubber O-rings) | Body material | Cast steel, stainless steel 304/316/316l, etc | |
Range of motion | 0~90°±5° | Ball material | Stainless steel 304/316/316l etc |
Interface thread | GT52~GT83 G1/8" | Seat tightness | PTFE、PPL、 Metal material seal, etc |
GT110~GT210 AT52~AT210 G1/4" | Suitable temperature | PTFE≤150℃、PPL≤300℃、 Metal seal≤425℃ | |
Valve position signal | Locator: 4~20mA/reply: full ON/OFF signal | Applicable medium | Water, steam, oil corrosion and the corrosion medium, etc |
DONGGUAN JINYING VALVE AUTOMATION TECHNOLOGY CO., LTD.
Add：No.7, Xinyuanheng 2nd Road, Guancheng District, Dongguan Tel： +86 0769-22303021 Phone：+86 13829158155 E-mail：13829158155@qq.com Site：5ibeida.cn |
|
